Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
engineer-mechanical:inventor-advance [2019/01/11 22:26]
jjensen [Derive Parts]
engineer-mechanical:inventor-advance [2019/02/04 20:17] (current)
jjensen [Multi-Body Parts]
Line 10: Line 10:
  
 === Drawing From Derived Parts === === Drawing From Derived Parts ===
 +  * Step 1 - create raw stock say 1" round, save as Lathe1stProject-01.ipt
 +  * Step 2 - create new part, save as Lathe1stProject-02.ipt
 +  * Step 3 - Manage -> Insert panel - Derive
 +  * Step 4 - make edits
   * Insert each derived part as base drawings   * Insert each derived part as base drawings
   * Note, AutoCAD can insert Base View -> From Inventor (cool!!!)   * Note, AutoCAD can insert Base View -> From Inventor (cool!!!)
Line 20: Line 24:
   * removes detail ​   * removes detail ​
   * surface part, light weight .ipt   * surface part, light weight .ipt
 +
 +===== Knurling =====
 +  * Goal is to create a 3D printed part with a knurled surface
 +  * Inventor 2019 doesn'​t have a built in Knurling Tool, have to make them manual, similar to cutting threads. Note a thread profile is the same plane as the longitudinal profile whereas the knurl profile is normal to the coil path.
 +  * Step 1 - create the round workpiece
 +  * Step 2 - draw the knurl profile, need to extend beyond the end of the knurl
 +  * Step 3 - coil
 +    * Pitch 4" means the coil will do one revolution at a height of 4"
 +      * Then if Height is enter as 2", the the coil will do half a revolution
 +      * If Height is entered as 4", then the coil will do two revolutions
 +    * Output surface
 +    * Revolution and height = TPI
 +  * Step 4 - circular pattern copy
 +  * Step 5 - mirror
 +
 +===== Multi-Body Parts =====
 +  * When working with multi-body parts, need to select the solid body (Solids button). Example
 +  * Extrude with New Solid option
 +    * {{engineer-mechanical:​inventor-advance:​extrude-new-solid-body.png|Extrude New Solid Body}}
 +  * Extrude - select Solid body
 +    * {{engineer-mechanical:​inventor-advance:​extrude-select-solid-body.png|Extrude Select Solid Body}}
Navigation

Civil Engineering Engineering - Computer Engineering - Electrical Mechanical Engineering

Print/export
QR Code
QR Code engineer-mechanical:inventor-advance (generated for current page)