Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
engineer-mechanical:csi:tapping-plate [2019/06/14 14:08]
jjensen
engineer-mechanical:csi:tapping-plate [2019/07/18 02:39] (current)
jjensen [References]
Line 1: Line 1:
 ===== Mill Project - Tapping Plate ===== ===== Mill Project - Tapping Plate =====
   * {{engineer-mechanical:​csi:​tapping-plate:​tapping-plate-print.png|Tapping Plate Print}}   * {{engineer-mechanical:​csi:​tapping-plate:​tapping-plate-print.png|Tapping Plate Print}}
 +  * {{engineer-mechanical:​csi:​tapping-plate:​asme-y14-5-rectcoord.png|ASME Y14.5-2009 Rectangular Coordinate Dimensioning in Tabular Form}} 
 +  * {{engineer-mechanical:​csi:​tapping-plate:​ncs-detail-indicator.png|National CAD Standard - Detail Indicator}}
 ===== Drill Hole Size for Tapping ===== ===== Drill Hole Size for Tapping =====
   * "All references to percent of thread engagement have been eliminated from this document. Past changes in the thread form designation of the '​basic'​ thread height from 0.750H to 0.625H confused the calculation of percent of thread engagement. This calculation has been used in the past for threaded products users to determine drill size selection. It is now recommended that users select a drill size that will result in a hole size that lies between the maximum and minimum size of the internal thread'​s minor diameter shown in the tables included in this Standard."​ (Unified Inch Screw Threads, ASME B1.1-2003, p. vi)   * "All references to percent of thread engagement have been eliminated from this document. Past changes in the thread form designation of the '​basic'​ thread height from 0.750H to 0.625H confused the calculation of percent of thread engagement. This calculation has been used in the past for threaded products users to determine drill size selection. It is now recommended that users select a drill size that will result in a hole size that lies between the maximum and minimum size of the internal thread'​s minor diameter shown in the tables included in this Standard."​ (Unified Inch Screw Threads, ASME B1.1-2003, p. vi)
 +
 +==== References ====
 +  * Screw Gage Assignment
 +    * {{engineer-mechanical:​csi:​tapping-plate:​screw-gage-assignment.png|Screw Gage Assignment}}
 +  * Screw Gage Instruction Sheet
 +    * {{engineer-mechanical:​csi:​tapping-plate:​screw-gage-instructions.png|Screw Gage Instruction Sheet}}
 +  * {{engineer-mechanical:​csi:​tapping-plate:​screw-gage.png|Screw Gage}}
 +  * [[http://​www.neme-s.org/​Shaper%20Books/​Odds%20and%20ends/​MACHINE%20SHOP%20PROJECTS%20%20BEGINNER.pdf|Projects for the Beginning Student Machinist - Connecticut State Dept Education]]
Navigation

Civil Engineering Engineering - Computer Engineering - Electrical Mechanical Engineering

Print/export
QR Code
QR Code engineer-mechanical:csi:tapping-plate (generated for current page)