Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
engineer-civil:titleblock-jerome [2018/03/05 22:47]
jjensen [NCS Symbols - Div 01 - General Requirements]
engineer-civil:titleblock-jerome [2019/01/16 21:33] (current)
jjensen [Edge of Pavement - Block]
Line 284: Line 284:
     * might need to scale, using 1"​=100'​ try scale BSCALE 10     * might need to scale, using 1"​=100'​ try scale BSCALE 10
       * BSCALE 50 if using 1"​=50'​       * BSCALE 50 if using 1"​=50'​
 +    * might need to rotate the block. If the viewport is rotate like on the S Tiger project, then need to rotate the block 90. If normal viewport, the block should be pointing up, then will align properly along the edge of pavement line.
     *  WBLOCK **coj-eop-x10.dwg**     *  WBLOCK **coj-eop-x10.dwg**
   * MEASURE BLOCK   * MEASURE BLOCK
-    * Problem - unable to scale block in command, either ​use ARRAY or scale the block and WBLOCK **coj-eop-x20.dwg**+    * Problem - unable to scale the block within the MEASURE ​command 
 +      * Option 1 - select all the blocks when done with the MEASURE command and resize in the Properties window. 
 +      * Option 2 - use the ARRAY command 
 +      * Option 3 - create a new block - scale the original ​block drawing ​and WBLOCK **coj-eop-x20.dwg**
     * Step 0     * Step 0
       * convert all lines to polylines using PEDIT JOIN       * convert all lines to polylines using PEDIT JOIN
Navigation

Civil Engineering Engineering - Computer Engineering - Electrical Mechanical Engineering

Print/export
QR Code
QR Code engineer-civil:titleblock-jerome (generated for current page)