Drawing Setup

  • New drawing based on _AutoCAD Civil 3D (Imperial) NCS.dwt
    • AutoCAD Template\acad -Named Plot Styles.dwt
      • Named Plot Styles (.stb)
    • Remember the acad.dwt is based on color based plot styles (.ctb)
  • CONVERTPSTYLES
  • Architectural Drafting & Design, 6th by Jefferis, Madsen & Madsen, p. 282
  • Architectural Drafting & Design, 6th by Jefferis, Madsen & Madsen, p. 289
  • Architectural Drafting & Design, 6th by Jefferis, Madsen & Madsen, p. 290
  • Architectural Drafting & Design, 6th by Jefferis, Madsen & Madsen, p. 299

Boundary Line

  • Current layer: C-PROP-LINE, Linetype: PHANTOM, Lineweight 0.50mm
    • see Architectural Drafting & Design, 6th by Jefferis, Madsen & Madsen, p. 299
  • Use an assumed origin point of 5000,5000 to be the southwest corner of the lot (labelled EL 102') in Figure 15-9 on p. 290.
  • LINE 5000,5000
    • use wheel mouse to zoom to point
  • 'BD 1 34-9-22 112.93
    • use wheel mouse to zoom to line
  • LINE select 5000,5000 point
  • 'BD 2 88-6-14 134.92
  • 1 1-29-48 95 (should still be in the Bearing Distance transparent command)
    • Bearing Typo error on graphic, should be North 1deg 29' 48“ East, not West
  • 4 88-30-12 66.90
  • escape out of BD and LINE
  • ARC Start End Radius (Home tab > Draw panel > Arc flyout/dropdown menu > Start End Radius)
  • Drawing Arcs
Navigation

Civil Engineering Engineering - Computer Engineering - Electrical Mechanical Engineering

Print/export
QR Code
QR Code engineer-civil:siteplan (generated for current page)